W2 Hunter

I have one of my W2 hunters for sale. This one is sporting a polished hamon, nickel silver guard, blue curly maple handle, and suede lined sheath.

Specs:

Steel: clay quenched W2
Blade length: 4.5″
OAL: 9.75″
Thickness: .130″

This is $300 USD shipped in Canada and USA.

 photo 20170128_201053_zpsnsee42g0.jpg

 photo 20170128_201155_zps3t2jkups.jpg

 photo IMG_4214_zpscktwrzre.jpg

2 Clipped Hunters

Clipped Hunter – Green spalted maple

This knife has a little more length than the last 2, which would work well in the kitchen or in the field. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 4.5″
OAL: 9.5″
Handle: Spalted maple, dyed and stabilized green, with carbon fiber pins.

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4199_zpslffcgacd.jpg

 photo IMG_4198_zpsuvovs6kp.jpg

 photo IMG_4197_zpsa78zorge.jpg

 photo IMG_4200_zpswwnhr2tz.jpg

Clipped Hunter – Desert Ironwood

This knife has a little more length than the spear hunters. The handle on this one brings it up a notch. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 4.5″
OAL: 9.5″
Handle: Arizona Desert Ironwood, with carbon fiber pins.

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4194_zps61xhkuj0.jpg

 photo IMG_4192_zpsas86apua.jpg

 photo IMG_4190_zpssxiatnxq.jpg

 photo IMG_4195_zpssyxwz1on.jpg

2 Spear Hunters

Spear hunter – Feather walnut

This is a sharp looking, and sharp cutting blade. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 3.5″
OAL: 8.5″
Handle: Stabilized black feather walnut and carbon fiber pins

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4204_zpshrspfvuo.jpg

 photo IMG_4203_zpsi7lfxktn.jpg

 photo IMG_4201_zpsn8nknmia.jpg

 photo IMG_4205_zpsqipyc7yj.jpg

Spear hunter – Green canvas micarta

This is a rugged little cutter that will be perfect for the bush. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 3.5″
OAL: 8.5″
Handle: Green canvas micarta and carbon fiber pins.

SOLD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.
 photo IMG_4207_zpsiasconer.jpg

 photo IMG_4206_zpspvurewom.jpg

 photo IMG_4208_zpssdaodc7e.jpg

 photo IMG_4209_zps46g6pa3n.jpg

Mossy Trail #5

Here is a custom order that I just finished up. It’s my Mossy Trail pattern, made from W2 steel, with a clay quenched hamon. The Scales are redwood burl, with blue G10 liners. The knife is ground really thin, and hand sharpened at 20 dps. It is super sharp!

Comments and questions welcomed.

 photo IMG_4051_zpszyif8k5n.jpg

 photo IMG_4050_zpsxtb7qnom.jpg

 photo IMG_4058_zpssmvutc8w.jpg

 photo IMG_4062_zpsyhpy7tqt.jpg

 photo IMG_4066_zpsucgyjrqs.jpg

W2 koa hunter

This is a hunter made from W2 steel. The blade features a wavy hamon, and drop point shape. The bolster is nickel silver, with a coined G-10 spacer, and premium curly Hawaiian Koa handle.

The sheath is hand stamped and dyed, vegetable tanned leather. The retention strap is suede lined to protect the handle from the snap.

Please send me a message through my contact page if you are interested in this knife.

 photo IMG_4016_zpsj8gd0ghd.jpg

 photo IMG_4019_zpsnckvfamq.jpg

 photo IMG_4025_zpsbn5yk9xb.jpg

 photo IMG_4027_zpsfrarcmzz.jpg

 photo IMG_4028_zps3gy7rf5y.jpg

Light duty camp knife

Here’s a camp knife that i finally got around to finishing. W2 steel, clay quenched with a hamon. 13.25″ OAL!

Curly Koa and tiger maple frame handle with a carbon fiber pin.

Nickel silver ferrule, and a copper spacer made from a 1916 British penny.

The handle is proud of the spacers and bevelled for comfort. This caused the illusion of a gap, but it is only a bevelled edge.

SPECS:

Clay quenched W2 steel
OAL: 13-1/4″
Blade width: 1-1/2″ at the heel
Blade: 1/8″ with a tapered tang. Full flat grind, this thing is a slicing machine!
Sharpened to 20 dps
Comes with a hand stamped butterfly sheath.

$300 USD shipped TYD in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.
 photo IMG_20151112_201218_zpsqlsoner4.jpg
 photo IMG_3952_zpsamrkyvvw.jpg
 photo DSC_0817_zpsw47lak4t.jpg

Black diamond Rifleman’s knife

This is the Black Diamond Rifleman’s knife.

An old black diamond file, through tang construction. Amber dyed elk antler, brass guard and buttcap, and a copper ferrule. All of the metal fittings were jeweled with an engraving pen.

The pommel nut is off-center.

SPECS:

Black diamond file, annealed then heat treated by me.
OAL: 10-3/4″
5″ cutting edge
Blade width: just under 1″ at the ricasso.
Blade: 5/32″
Sharpened to 20 dps with a microbevel
Comes with a hand stamped leather sheath.

$185 USD plus $15 for shipping in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.

<a href="http://s1328.photobucket.com/u photo DSC_0818_zpsddfigz4q.jpgser/Greg_Jusulak/media/Mobile%20Uploads/DSC_0820_zpsc9jeathx.jpg.html” target=”_blank”> photo DSC_0820_zpsc9jeathx.jpg
 photo DSC_0819_zps9ifr3btx.jpg
 photo DSC_0816_zpsck7zsqav.jpg
 photo PSX_20151202_203558_zpsgeddbjfy.jpg

Mossy Trail #4

This is a knife that I completed for the 2015 Bladeforums Christmas KITH.

Blade steel was clay quenched W2.
Handle was stabilized California redwood burl
OAL: 8-3/4″
Blade Length: 4-1/4″
Blade width: 1-1/4″ at the ricasso
Blade: 1/8″ with a tapered tang. Full flat grind, this thing is a slicing machine!
Carbon Fiber pins and a copper lanyard tube

 photo 2015-10-23_22.01.19_zpspw7beidp.jpg

 photo 2015-10-23_21.59.01_zps1mmnv0k5.jpg

 photo 2015-10-23_22.07.02_zpsscksk7fx.jpg

 photo IMG_20151108_163923_zps3wl3dgyy.jpg

Mossy Trail #3 – Blue #2 San Mai and Bog Oak

I modified my Mossy Trail hunter slightly, and this is what I have come up with.

The steel is San Mai with Blue #2 (Aogami) core, and low carbon sides. This steel is well known to take a fine edge, and is VERY sharp.

The handle is beautiful Ancient Bog Oak from the Ukraine. There is subtle wood grain with flecks of silver throughout the handle. The wood was stabilized by WSSI.

SPECS:

OAL: 8-3/4″
Blade Length: 4-1/4″
Blade width: 1-1/4″ at the ricasso
Blade: 1/8″ with a tapered tang. Full flat grind, this thing is a slicing machine!
Copper pins and lanyard tube
Comes with a hand stamped, pancake style leather sheath. This style of sheath is very comfortable to wear.

$260 USD shipped TYD in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.

WARRANTY:

I offer a lifetime common sense warranty against defects in workmanship and materials. If you have any issues with the knife feel free to contact me and we will get them sorted out.

 photo IMG_3921_zpsvnmzkxdg.jpg

 photo IMG_3916_zpsc5bibzkz.jpg

 photo IMG_3917_zps1ms3gf9t.jpg

 photo IMG_3919_zpsnxmdryob.jpg

 photo IMG_3922_zpstp6cy6ex.jpg

 photo IMG_3926_zps2jvyztfa.jpg

 photo IMG_3934_zpsdjg1bacl.jpg

SOLD – Harpoon EDC; Curly KOA and CPM-154

Here’s a harpoon EDC made from CPM-154. The handles are premium Curly Hawaiian Koa, finished to a very high sheen. The chatoyance in the handle is incredible. It is very hard to capture with a camera, but I added a short video to show it.

SPECS:
OAL: 7-7/8″
Blade length: 3-1/2″
Thickness: 1/8″
Hidden lanyard hole for a clean look.

Hand rubbed 600 grit finish.
Carbon fibre pins
Brown leather sheath.
HT done by me in my Evenheat kiln, with a dry ice sub treatment.

$245 USD shipped TYD in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.

WARRANTY:

I offer a lifetime common sense warranty against defects in workmanship and materials. If you have any issues with the knife feel free to contact me and we will get them sorted out.

 photo IMG_3904_zps7gl1ynr3.jpg

 photo IMG_3912_zpsj3ypoggr.jpg

 photo IMG_3908_zpsa6kfsqkq.jpg

 photo IMG_3913_zps2nq3qtmv.jpg