Pictures are down

Unfortunately all of my knife photos have disappeared from this site. This is due to an unannounced change in photobucket’s policy regarding 3rd party hosting. They will not allow me to share photos anymore without charging a huge fee.

I have all of my photos backed up, and will slowly be moving over to another photo hosting site, and will be getting photos back on here.

Thanks for your understanding.
Shane

W2 Hunter

I have one of my W2 hunters for sale. This one is sporting a polished hamon, nickel silver guard, blue curly maple handle, and suede lined sheath.

Specs:

Steel: clay quenched W2
Blade length: 4.5″
OAL: 9.75″
Thickness: .130″

This is $300 USD shipped in Canada and USA.

 photo 20170128_201053_zpsnsee42g0.jpg

 photo 20170128_201155_zps3t2jkups.jpg

 photo IMG_4214_zpscktwrzre.jpg

2 Clipped Hunters

Clipped Hunter – Green spalted maple

This knife has a little more length than the last 2, which would work well in the kitchen or in the field. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 4.5″
OAL: 9.5″
Handle: Spalted maple, dyed and stabilized green, with carbon fiber pins.

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4199_zpslffcgacd.jpg

 photo IMG_4198_zpsuvovs6kp.jpg

 photo IMG_4197_zpsa78zorge.jpg

 photo IMG_4200_zpswwnhr2tz.jpg

Clipped Hunter – Desert Ironwood

This knife has a little more length than the spear hunters. The handle on this one brings it up a notch. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 4.5″
OAL: 9.5″
Handle: Arizona Desert Ironwood, with carbon fiber pins.

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4194_zps61xhkuj0.jpg

 photo IMG_4192_zpsas86apua.jpg

 photo IMG_4190_zpssxiatnxq.jpg

 photo IMG_4195_zpssyxwz1on.jpg

2 Spear Hunters

Spear hunter – Feather walnut

This is a sharp looking, and sharp cutting blade. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 3.5″
OAL: 8.5″
Handle: Stabilized black feather walnut and carbon fiber pins

$140 USD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.

 photo IMG_4204_zpshrspfvuo.jpg

 photo IMG_4203_zpsi7lfxktn.jpg

 photo IMG_4201_zpsn8nknmia.jpg

 photo IMG_4205_zpsqipyc7yj.jpg

Spear hunter – Green canvas micarta

This is a rugged little cutter that will be perfect for the bush. This blade is made with thin 15N20 steel, and a full flat grind. With the blade geometry, this thing will slice for days.

Specs:

Blade Thickness: .065″
Blade Length: 3.5″
OAL: 8.5″
Handle: Green canvas micarta and carbon fiber pins.

SOLD, shipped to your door in Canada and the USA. Other areas please ask for a shipping quote.
 photo IMG_4207_zpsiasconer.jpg

 photo IMG_4206_zpspvurewom.jpg

 photo IMG_4208_zpssdaodc7e.jpg

 photo IMG_4209_zps46g6pa3n.jpg

Kamisori Straight Razor

This is a hand forged Kamisori style straight razor. The blade was forged from a bar of W1 round bar. It features a double hollow ground blade, and satin belt finish. The edge was ground very thin before final sharpening. It had been sharpened at 17 dps.

This is my first hollow ground blade, done freehand. I think it turned out quite well.

[U]Specs:[/U]

OAL: 5-1/2″
Blade length: 2″
Thickness: 0.18″
Target hardness: 62-63 hrc

$75 USD shipped to Canada and USA.

 photo IMG_4098_zpsyturqsgo.jpg

 photo IMG_4094_zpsrr8hpdcu.jpg

 photo IMG_4090_zpsuweqejw2.jpg

 photo IMG_4095_zpsxknrnnu6.jpg

 photo IMG_4096_zps3oobp5rm.jpg

Outdoorsman Hatchet

This is the first of a run of full tang outdoorsman hatchets that I will be offering. Made for chopping wood, or delimbing branches. This was the test hatchet, and it turned out well.

The steel is 1/4″ 1075 steel, triple normalized, and heat treated to a 57- 58 HRC goal. The tang has been spring tempered with a torch.

The overall length is 14″, with a 3″ cutting edge. This one is sporting black linen micarta handle with stainless pins. Comes with a leather edge cover.

 photo 2396c6a0-a224-4b94-89d7-b28a75fbfd82_zpsngqpxqca.jpg

 photo IMG_4087_zps1ueam6vn.jpg

 photo 20160822_111525_zpszhm5rl3o.jpg

Harpoon EDC/Hunter #3

Here is an EDC/Hunter pattern that I really like making. This is the third knife I have made in this style. The others had hidden lanyards, but I figured I would change it up this time. Variety is the spice of life.

The steel is clay quenched W2 steel. The handle is figured claro walnut, with subtle red G10 liners.

 photo IMG_4080_zpsokqvg0kz.jpg
 photo IMG_4075_zpsvg5dwe5g.jpg
 photo IMG_4067_zps2ettdahk.jpg
 photo IMG_4078_zps1unqhzbe.jpg

 photo IMG_4067_zps2ettdahk.jpg

Mossy Trail #5

Here is a custom order that I just finished up. It’s my Mossy Trail pattern, made from W2 steel, with a clay quenched hamon. The Scales are redwood burl, with blue G10 liners. The knife is ground really thin, and hand sharpened at 20 dps. It is super sharp!

Comments and questions welcomed.

 photo IMG_4051_zpszyif8k5n.jpg

 photo IMG_4050_zpsxtb7qnom.jpg

 photo IMG_4058_zpssmvutc8w.jpg

 photo IMG_4062_zpsyhpy7tqt.jpg

 photo IMG_4066_zpsucgyjrqs.jpg

NAG – Chopper

This one is a custom order that I finished up today. It’s a chopper, built to the customer’s specs.

Here are the specs:

-Handle is 8-9 oz leather slabs, wrapped in epoxy soaked hemp cord.
-Steel is W2 hardened to a goal of 61 HRC
-OAL: 17.5″
-Blade length 12.5″
-Height at ricasso: 2″
-Thickness at ricasso: 0.2″

This thing is a beast in the hand. It likes to chop!

 photo IMG_4032_zpsbh2cs5je.jpg

 photo IMG_4040_zpsdxdwtw7y.jpg

 photo IMG_4033_zpsgpnk2ply.jpg

 photo IMG_4038_zpsfrkifoyg.jpg

 photo IMG_4045_zpsvuwldlmi.jpg

 photo IMG_4041_zpswsonw8x3.jpg