Light duty camp knife

Here’s a camp knife that i finally got around to finishing. W2 steel, clay quenched with a hamon. 13.25″ OAL!

Curly Koa and tiger maple frame handle with a carbon fiber pin.

Nickel silver ferrule, and a copper spacer made from a 1916 British penny.

The handle is proud of the spacers and bevelled for comfort. This caused the illusion of a gap, but it is only a bevelled edge.

SPECS:

Clay quenched W2 steel
OAL: 13-1/4″
Blade width: 1-1/2″ at the heel
Blade: 1/8″ with a tapered tang. Full flat grind, this thing is a slicing machine!
Sharpened to 20 dps
Comes with a hand stamped butterfly sheath.

$300 USD shipped TYD in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.
 photo IMG_20151112_201218_zpsqlsoner4.jpg
 photo IMG_3952_zpsamrkyvvw.jpg
 photo DSC_0817_zpsw47lak4t.jpg

Black diamond Rifleman’s knife

This is the Black Diamond Rifleman’s knife.

An old black diamond file, through tang construction. Amber dyed elk antler, brass guard and buttcap, and a copper ferrule. All of the metal fittings were jeweled with an engraving pen.

The pommel nut is off-center.

SPECS:

Black diamond file, annealed then heat treated by me.
OAL: 10-3/4″
5″ cutting edge
Blade width: just under 1″ at the ricasso.
Blade: 5/32″
Sharpened to 20 dps with a microbevel
Comes with a hand stamped leather sheath.

$185 USD plus $15 for shipping in Conus and Canada. I will also ship to other areas, just email or PM me for a shipping quote. First to say I’ll take it, followed by a PM or email gets it. Posted on multiple sites, so I will go by time stamp. I take paypal, EMT, cash, or cheque.

Thanks for looking. Any comments or questions are welcomed.

<a href="http://s1328.photobucket.com/u photo DSC_0818_zpsddfigz4q.jpgser/Greg_Jusulak/media/Mobile%20Uploads/DSC_0820_zpsc9jeathx.jpg.html” target=”_blank”> photo DSC_0820_zpsc9jeathx.jpg
 photo DSC_0819_zps9ifr3btx.jpg
 photo DSC_0816_zpsck7zsqav.jpg
 photo PSX_20151202_203558_zpsgeddbjfy.jpg

Mossy Trail #4

This is a knife that I completed for the 2015 Bladeforums Christmas KITH.

Blade steel was clay quenched W2.
Handle was stabilized California redwood burl
OAL: 8-3/4″
Blade Length: 4-1/4″
Blade width: 1-1/4″ at the ricasso
Blade: 1/8″ with a tapered tang. Full flat grind, this thing is a slicing machine!
Carbon Fiber pins and a copper lanyard tube

 photo 2015-10-23_22.01.19_zpspw7beidp.jpg

 photo 2015-10-23_21.59.01_zps1mmnv0k5.jpg

 photo 2015-10-23_22.07.02_zpsscksk7fx.jpg

 photo IMG_20151108_163923_zps3wl3dgyy.jpg